Richell 803840 94961-0 Manual De Instrucciones página 4

How to open and close Pet Door
①Turn the Lock upward
②Slide it as shown
③Then, open the door
How to Disassemble
1. Disassemble connection
Remove Fixing Bolts.
How to Clean
<Main unit>
l Use a mild detergent and water and clean with a soft cloth/sponge. After cleaning, place in shaded area to air dry. Do not
place this product in direct sunlight. This may cause discoloration, deformation or rust.
l Cleaning with a scrub brush and/or using a polishing powder may cause scratches, rust and/or discolor this product.
l Do not use harsh chemicals such as thinner, benzene or alcohol as these may cause damage/discoloration to the wood finish.
l When using cresol or other disinfectants, make sure to dilute them, otherwise damage to the wood finish or discoloration
may occur.
<Plastic part>
l Use a mild detergent and water to clean. After cleaning, place in shaded area to air dry. Do not place this product in direct
sunlight. This may cause discoloration, deformation or rust.
Specifications
803840 94961-0 / 4973655 50281-5
UPC/JAN
Dimensions Use as tension mount gate
Use as freestanding gate
Material Frame : Natural wood (Rubber wood, Lacquer finish) Wire : Steel (Polyester coating)
Adjuster bolt rubber part ・ Rubber Skid : Elastomer Adjuster knob ・ Adjuster Bolt Receiver : Polypropylene
lPlease note that product specifications and design may change without prior notice for the purpose of the quality improvement.
lThere may be some joint war page and each product may experience different coloration in the wood grain of the wood as frames
are made of natural material.
lIf you find something wrong with this product, please let us know. Thank you!
Lock
2. Disassemble Side Panels
Remove the Fixing Bolts on Side Panels.
39.8 - 61.8"W x 1.8"D x 20.9"H
39.8 - 59.8"W x 18.5"D x 20.9"H
4
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795 Fax (972) 641-8495
www.richellusa.com
Visit us at
MADE IN VIETNAM