Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for sanding and brushing wood,
plastic, metal, filler (e.g. plaster) and varnished surfaces
without the use of water. It is especially suitable for sanding
uneven surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Grinding spindle
(2)
Dust extraction guard
(3)
Extraction outlet
(4)
Clamping screw for mounting dust extraction
guard
(5)
Handle (insulated gripping surface)
(6)
On/off switch
(7)
Speed preselection thumbwheel
(8)
Flexible wheel
(9)
Flap wheels
(10)
Shank for sanding sleeve
A)
(11)
Sanding sleeve
(12)
SDS mount
(13)
SDS mounting spring
(14)
SDS actuator button for unlocking the abrasive
tool
(15)
Tool arm
(16)
Fastening groove of the dust extraction guard
(17)
Latching grooves
A)
(18)
Extraction hose
(19)
Dust extraction adapter (dia. 19 mm)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Sanding roller
Article number
Speed preselection
Rated power input
No-load speed n
0
Bosch Power Tools
Sanding roller
Weight according to EPTA-
Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 79 dB(A); sound power level
90 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Total vibration values a
determined according to EN 62841-2-4:
Sanding with sanding sleeve: a
Sanding with flap wheel (60 mm): a
2
s
Sanding with flap wheel (10 mm): a
Working with wire brush: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
A)
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
A)
Assembly
u
Changing the abrasive tools
Texoro
You can use the SDS mount (12) on the grinding spindle (1)
3 603 CB5 1..
to easily and conveniently change the abrasive tool without
●
using additional tools.
The Autolock system locks the grinding spindle when the
W
250
power tool is switched off. It is better to attach or remove
-1
min
1600−3000
abrasive tools when the grinding spindle is fixed in place.
(triax vector sum) and uncertainty K
h
= 3.5 m/s
h
,
= 6 m/s
h
Pull the plug out of the socket before carrying out any
work on the power tool.
1 609 92A 4M6 | (21.08.2019)
English | 15
Texoro
kg
1.3
/ II
2
2
, K = 1.5 m/s
,
2
= 2.5 m/s
, K = 1.5 m/
h
2
2
= 3 m/s
, K = 1.5 m/s
,
h
2
2
, K = 1.5 m/s
.
Publicidad
Tabla de contenido
