Truth Table; Timer (Can Be Set Individually For Out1 And Out2); Timer Mode; Disabled - CARLO GAVAZZI LD30BI10BPIO Serie Manual De Instrucciones

"Gated SR-FF" function
The function is designed to: e.g. function as a filling or emptying function using only two interconnected
sensors
X – no changes to the output.
4
1. SSC1
S.P (trimmer)
Two P
Windows
Hyst. Auto/Adj.
2. SSC2
S.P .
Two P.
Windows
Hyst. Adj.
3. Temperature
4. EXT-Input

2.4.4. Timer (Can be set individually for Out1 and Out2)

The Timer allows the user to introduce different timer functions by editing the 3 timer parameters:

• Timer mode

• Timer scale
• Timer value
2.4.4.1. Timer mode
This selects which type of timer function is introduced on the Switching Output. Any one of the following is
possible:

2.4.4.1.1. Disabled

This option disables the timer function no matter how the timer scale and timer delay is set up.

2.4.4.1.2. Turn On delay (T-on)

The activation of the switching output is generated after the actual sensor actuation as shown in the figure
below.
14
Rev.00 - 01.2020 | LD30 IO-Link manual ENG | © 2020 | CARLO GAVAZZI Industri
Symbol
Selector Logic
A
A A - B
B
One of AND, OR,
1 to 4 XOR, S-R
Selector Logic
B A - B
One of AND, OR,
A
1 to 4 XOR, S-R
B

Truth table

A
0
0
1
1
Time Output
delay inverter
Out 1
ON, OFF N.O., N.C.
One-shot
Time Output
delay inverter
Out 2
ON, OFF N.O., N.C.
One-shot
B Q
0 0
1 X
0 X
1 1
Sensor
output
SO1
NPN, PNP,
Push-Pull
Sensor
output
SO2
NPN, PNP,
EXT-
Push-Pull
EXT-Input Input