Iodd File And Factory Setting; Iodd File Of An Io-Link Device; Factory Settings; Appendix - CARLO GAVAZZI LD30BI10BPIO Serie Manual De Instrucciones

6. IODD file and factory setting

6.1. IODD file of an IO-Link device

All features, device parameters and setting values of the sensor are collected in a file called I/O Device
Description (IODD file). The IODD file is needed in order to establish communication between the IO-Link master
and the sensor. Every supplier of an IO-Link device has to supply this file and make it available for download
on their web site.
The IODD file includes:
• process and diagnostic data
• parameters description with the name, the allowed range, type of data and address (index and
sub-index)
• communication properties, including the minimum cycle time of the device
• device identity, article number, picture of the device and Logo of the manufacturer
An IODD file is available on the Carlo Gavazzi Website: tbd

6.2. Factory settings

The Default factory settings are listed in appendix 7 under default values.

7. Appendix

7.1. Acronyms

IntegerT Signed Integer
OctetStringT Array of Octets
PDV Process Data Variable
R/W Read and Write
RO Read Only
SO Switching Output
SP Set Point
TP Teach Point
SSC Switching Signal Channel
StringT String of ASCII characters
TA Temperature Alarm
UIntegerT Unsigned Integer
WO Write Only
Rev.00 - 01.2020 | LD30 IO-Link manual ENG | © 2020 | CARLO GAVAZZI Industri
27