Windows Mode Procedure - CARLO GAVAZZI LD30BI10BPIO Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 95
2) Dynamic teach command sequence:
1. Press Teach SP1 Start here. (Parameter 2, SubIndex 0 = 71 (0x47)).
2. Press Teach SP1 Stop here. (Parameter 2, SubIndex 0 = 72 (0x48)).
3. Press Teach SP2 Start here. (Parameter 2, SubIndex 0 = 73 (0x49)).
4. Press Teach SP2 Stop here. (Parameter 2, SubIndex 0 = 74 (0x4A)).
5. Optional press Teach Apply. (Parameter 2, SubIndex 0 = 64 (0x40)).

2.5.2.3. Windows mode procedure

1) Single value teach command sequence:
(Buttons are found in menu : Teach-in->Teach in single value)
1. Press Teach SP1. (Parameter 2, SubIndex 0 = 65 (0x41)).
2. Press Teach SP2. (Parameter 2, SubIndex 0 = 66 (0x42)).
3. Optional press Teach Apply (Parameter 2, SubIndex 0 = 64 (0x40)).
2) Dynamic teach command sequence:
(Buttons are found in menu : Teach-in->Teach in Dynamic)
1. Press Teach SP1 Start here. (Parameter 2, SubIndex 0 = 71 (0x47)).
2. Press Teach SP1 Stop here. (Parameter 2, SubIndex 0 = 72 (0x48)).
3. Press Teach SP2 Start here. (Parameter 2, SubIndex 0 = 73 (0x49)).
4. Press Teach SP2 Stop here. (Parameter 2, SubIndex 0 = 74 (0x4A)).
5. Optional press Teach Apply. (Parameter 2, SubIndex 0 = 64 (0x40)).
20
Rev.00 - 01.2020 | LD30 IO-Link manual ENG | © 2020 | CARLO GAVAZZI Industri
Sensor
SSC
ON
Hyst
Sensor
SSC
SP2
TP1
OFF
Hyst
Sensor
SSC
SP2
TP2
OFF
SP2
SP1
TP2
TP1
OFF
Hyst
SP1
TP1
ON
window
Hyst
SP1
TP1
ON
window
Sensing distance
Sensing distance
OFF
Sensing distance
OFF

Publicidad

Tabla de contenido
loading

Tabla de contenido