For Your Safety; General Aspects; Appropriate Use - Hazet-Werk 4902/6 Instrucciones De Uso

GB
USA
This paragraph gives an overview about all
important security advices which help to
ensure the optimal protection of the personnel
as well as the safe and trouble-free operation
of the appliance. Additionaly, the different
chapters contain concrete security advices
that are marked with symbols in order to avert
immediate danger. Furthermore, all picto-
grams, stickers and labels on the appliance
must be observed and have to be kept
legible.

1. General aspects

• The device was developed and fabricated
according to the technical norms and stan-
dards that have been valid at that time and
is considered to be operationally reliable.
Nevertheless, the device can present a
danger when it is not used as intended or
in an inappropriate way by non-qualified
personnel. Please take care that any per-
son using this tool or carrying out mainte-
nance work carefully reads through these
operating and safety instructions and
understands all information given in there,
before the first use.
• Any modification of the device is strictly
forbidden.
• All security advices, warning and operation
notices on the device have to be kept legible.
Replace all damaged labels or stickers.
• All indications concerning setting values
and setting ranges must be observed.
2. Operator's Liability
• Keep the operating and safety instructions
always together with the Inside Spring Vice.
• The device must only be used if it is tech-
nically faultless and operationally reliable.
• All security devices must always be within
reach and should be checked regularly.
• Apart from the safety advices given in
these operating instructions, the user of
this tool has to observe and respect the
general safety regulations, regulations for
the prevention of accidents and regulations
for environmental protection being valid for
the application area of this device, too.
10

For Your Safety

3. Appropriate Use

Operational reliability can only be
safeguarded, if the device is used as
intended and in compliance with the
indications given in the operating instructions.
Apart from the safety advices given in these
operating instructions, the general safety
regulations, regulations for the prevention of
accidents and regulations for environmental
protection being valid for the application area
of this device have to be observed and res-
pected, too.
• The HAZET Inside Spring Vice is designed
for installing and removing straight coil
springs on passenger cars. For conical coil
springs, the Inside Spring Vice must only
be used in conjunction with special tensio-
ning jaws for conical springs.
• The Inside Spring Vice is perfectly suited to
the limited spaces when installing and
removing the coil spring at the rear axle of
the following vehicles:
BMW 1-series: E 87: 116i, 118 d, 120i,
120d, E87: 118i since 2004;
BMW 3-series: E90: 320i, 320d, 325i,
330i limousine since 2004, E91: 320, 325,
330 Touring since 2005
• Select tensioning jaws to fit the spring.
• The forged and tempered tensioning jaws
and the tempered spindle as well as the
tempered driving parts allow a capacity of
22,000 N.
• The current repair instructions of the
vehicle manufacturer have to be compulso-
rily observed.
• Any deviation from the intended use and/or
any misapplication of the device are not
allowed and will be considered as improper
use.
• Any claims against the fabricant and/or its
authorized agents because of damage
caused by improper use of the device are
excluded.
• Any personal injury or material losses cau-
sed by improper use are the sole responsi-
bility of the operator and user.