Stihl SR 430 Manual De Instrucciones página 58

English
Cranking
Place the unit securely on the
N
ground and make sure that
bystanders are well clear of the
nozzle outlet.
Make sure you have a firm footing:
N
Hold the unit with your left hand on
the housing and put one foot against
the base plate to prevent it slipping.
Pull the starter grip slowly with your
N
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length – it might otherwise break.
Do not let the starter grip snap back.
N
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
Continue cranking until the engine
N
runs.
56
As soon as the engine runs
4
Pull the throttle trigger – the choke
N
knob (4) automatically returns to the
run position (e).
At very low outside temperatures
Open throttle slightly – warm up the
N
engine for a short period.
Stopping the Engine
Move the setting lever in the
N
direction of 0 – the engine stops –
the setting lever springs back to the
on position.
Other Hints on Starting
Engine stalls in cold start position c or
under acceleration
Move the choke knob to o and
N
continue cranking until the engine
runs.
Engine does not start in warm start
position o
Move the choke knob to c and
N
continue cranking until the engine
runs.
If the engine does not start
Check that all settings are correct.
N
Check that there is fuel in the tank
N
and refuel if necessary.
Check that the spark plug boot is
N
properly connected.
Repeat the starting procedure.
N
SR 430, SR 450