GGP ITALY B 26 J Manual De Instrucciones página 34

PROBLEM
5. If the engine floods
6. The cutting means must
not move when the
engine is running idle
7. The machine starts to
vibrate abnormally
8. The machine has
struck a foreign body.
If problems persist after having performed the above operations, contact your dealer.
PROBABLE CAUSE
The starter grip has been driven
repeatedly with the starter inserted.
Incorrect adjustment
of fuelling
Damaged or loose parts.
Damaged or loose parts.
Remove the spark plug (fig. 22) and
pull gently on the starter grip (fig.
12.I, fig. 13.I) to eliminate excess fuel,
then dry the electrodes of the spark
plug and refit it on the engine.
Contact the authorised assistance centre.
Stop the machine and remove the
spark plug cap (fig. 12.H; fig. 13.H).
Inspect for damage.
Check for and tighten any loose parts.
Have all checks, repair work and
replacements carried out by a
specialized Centre only.
Stop the machine and remove the
spark plug cap (fig. 12.H; fig. 13.H).
Inspect for damage.
Check for and tighten any loose parts.
Have all checks, repair work and
replacements carried out by a
specialized Centre only.
EN - 16
REMEDY