EN-6
MAINTENANCE
Daily Checks
•
Check that the rocker feet are properly seated in the holes of each load cell.
•
Check that the 4 feet are in contact with the floor.
•
Check that the scale is free from debris, especially under the edges of the scale.
•
Check that there is no damage to the connecting cable.
Cleaning
Risk of Electrical Shock
Disconnect the power source before cleaning the scale with any liquids.
Maintenance of the floor scale is limited to regular cleaning.
– Wipe surfaces with a damp cloth.
– Use only common household cleaning agents.
– Never use water spray or high pressure cleaners.
When using optional Ramps or Foot Plates:
– Keep the air gap at the edge of the Floor Scale free of debris.
DEFENDER 3000 Series Floor Scale