Max PowerLite AKHL1050E Manual De Operaciones página 11

8.
9.
1. Unpack the compressor and check for any deficiency, damage caused during transportation and loose bolts and screws.
2. Be sure to install the compressor on a flat floor, with leg rubber underneath it; the allowable tilt angle of the floor is up to 10 degrees. If
the installation floor is tilted and slippery, ensure that the compressor does not move during operation. Do not use it on a shelf or a stand
where it may fall or tumble.
3. Install the compressor at the distance of 1 m or more from the wall to secure sufficient ventilation and cooling.
4. The adequate room temperature is +5℃ to +30℃. (0℃ to +40℃ at maximum)
Do not use the compressor in any place where the temperature is 0℃ or less or the ambient temperature exceeds +40℃.
NEVER BLOCK A VENTILATION OPENING OR USE THE MACHINE IN A BOX OR A NARROW
PLACE(IN A VEHICLE, ETC.)
Neglect of this may generate abnormal heat, causing a trouble or an accident.
NEVER SIT OR PLACE AN OBJECT ON THE TOP OF THE MACHINE.
Neglect of this could cause a trouble or break it.
11