Omega MMV700 MegaMouth Serie Manual Del Usuario página 18

DISASSEMBLING AND CLEANING
STEP 5
Place the juicing bowl under running water.
STEP 6
Under running water, clean the outside of the auger with a dish scrub. Use the tip of the
cleaning brush to push out any residue in the crevices on the bottom of the auger.
STEP 7
Clean the base with a soft damp towel and dry.
TIP: •
It is not necessary to completely
clean the juicer in between
making multiple juices during
a single juicing session.
• When finished juicing,
disassemble and clean
thoroughly between sessions
to prevent residue buildup.
16
TIP:
• The round brush can clean the juice spout
of the juicing bowl.
TIP: • Thoroughly clean the auger
ensuring that the auger is clean
without any residue.
• Completely dry before using.
NOTE:
• After juicing ingredients with seeds, make
sure to thoroughly clean the bottom crevice
of the auger. (If this area isn't properly
cleaned, it can damaged the auger.
NOTE: • If the towel is dripping wet, make sure to
squeeze out the excess liquid before using
it on the juicer.
QUICK RINSING:
1. With the juice tap closed, fill the juicing bowl with
water and turn on the juicer.
2. Let it run for a moment. Open the juice tap and let
the water run out of the juicing bowl.
1 2