2 Product description
MENU → CONTROL
→ Mode:
→ DHW boost
→ Ventilation boost
→ Time programme
assistant
→ Sytem off
2.10.2 INFORMATION menu item
MENU → INFORMATION
→ Current temperatures
→ Zone
→ DHW temperature
→ Water pressure: bar
→ Burner status:
→ Control elements
→ Menu introduction
→ Competent person contact info
→ Serial number
2.10.3 SETTINGS menu item
MENU → SETTINGS
→ Installer level
→ Enter access
code
→ Competent per-
son contact info
→ Service date:
→ Fault history
8
Domestic hot water weekly planner: Up to three time periods can be
set per day
DHW temperature: °C: Applies within the time periods
Domestic hot water mode is switched off outside of the time periods
Circulation weekly planner: Up to three time periods can be set per
day
The circulation pump pumps hot water to the draw-off points within the
time periods
Outside of the time periods, the circulation pump is switched off
→ Off
Domestic hot water mode is switched off
Heating up the water in the cylinder once
Heating mode is switched off for 30 minutes.
Programming of the desired temperature for Monday–Friday and Sat-
urday–Sunday; the programming applies for the time-controlled Heat-
ing, Domestic hot water and Circulation functions.
Overwrites the weekly planner for the Heating, Domestic hot water
and Circulation functions.
Installation is switched off. Frost protection remains active.
Explanation of the control elements
Explanation of the menu structure
Access to the installer level, factory setting: 00
Entering contact details
Enter the next service date for a connected component, e.g. heat gen-
erator
Faults are listed in chronological order
Operating and installation instructions sensoHOME 0020288192_00