Installation Configuration Menu Item - Vaillant sensoHOME VRT 380 Manual De Uso

MENU → SETTINGS
→ Installation con-
figuration
→ Screed drying
→ Change code
→ Language, time, display
→ Language:
→ Date:
→ Time:
→ Display brightness:
→ Daylight saving
time:
The change takes place:
– On the last weekend in March at 02:00 (daylight saving time)
– On the last weekend in October at 03:00 (standard time)
→ Offset
→ Room temperat-
ure: K
→ Outdoor temper-
ature: K
→ Factory settings
2.10.4

Installation configuration menu item

MENU → SETTINGS → Installer level → Installation configuration
→ Installation
→ Water pressure: bar
→ eBUS components
→ Adaptive heat curve:
→ Control:
0020288192_00 sensoHOME Operating and installation instructions
Functions (→ Installation configuration menu item)
Activate the Screed drying profile function for freshly laid screed in
accordance with the construction regulations.
The system control regulates the flow temperature independently of
the outdoor temperature. Setting screed drying (→ Installation config-
uration menu item)
After the power is switched off, the date is retained for approx. 30
minutes.
After the power is switched off, the time is retained for approx. 30
minutes.
→ Automatic
→ Manual
Comparison of the temperature difference between the measured
value in the system control and the value for a reference thermometer
in the living room.
Comparison of the temperature difference between the measured
value in the outdoor temperature sensor and the value for a reference
thermometer in the living room.
The system control resets all of the settings to the factory settings and
calls up the installation assistant.
Only the competent person can call up the installation assistant.
List of eBUS components and their software versions
Automatic fine adjustment of the heat curve. Prerequisite:
– The suitable heat curve for the building is set in the Heat
curve: function.
– The correct zone is assigned to the system control or the
remote control in the Zone assignment: function.
– Expanded is selected in the Room temp. mod.: function.
R.temp.contr It is controlled via the room temperature.
Product description 2
9