Prevention Measures For Users; Personal Safety Measures; Compliance With Safety Measures And Warnings - Kunzle & Tasin Bona Scorpion Manual De Funcionamento

Prevention Measures for Users

Personal safety measures

Sawdust can spread through the air and be inhaled when using the sander. Always wear a dust mask when using
the sanding equipment.
The eyes and/or body may suffer injury if personal safety clothing is not used. Always wear safety goggles,
protective clothing and a dust mask during sanding operations.
Lengthy exposure to noise levels during sanding operations may damage the hearing. Always use ear protectors
during sanding operations.
Never become distracted during sanding operations, check what is happening continually. Use common sense.
DO NOT use the machine when tired.

Compliance with safety measures and warnings

Using the machine when not fully assembled may cause
injury or damage to people or objects. DO NOT use the
machine when it is not fully assembled. Keep all fittings tightly
closed. Maintain machine settings in accordance with the
specifications.
Using the machine without the safety guards and covers in
position may cause injury or damage. Always ensure that all
safety guards and covers are in position and secured well.
The sanding machine may create an explosive environment.
Cigarettes, cigars, pipes, lighters, pilot flames, or any other
source of fire may create an explosion if lit during sanding
operations. No sources of fire should be kept near the work
area.
Poorly ventilated work areas may create an explosive
environment when some combustible materials are present in
the atmosphere, such as solvents, thinners, alcohol, fuel, some
paints, wood dust or other combustible materials. Floor sanding
machines may cause various materials and fumes to ignite.
Read the manufacturer's instructions for each chemical product
used and establish its combustibility. Always keep the work area
well-ventilated.
12 12
Striking nails when sanding may generate an explosion or fire.
Always ensure all nails are sunk before sanding surfaces.
Serious damage may occur if the power supply circuit trips
repeatedly or is undersized. Have the fuses, safety circuit and
power supply line checked by an authorized electrician.
Performing maintenance and/or repairing the machine when
it is not fully disconnected from the power supply may cause
death due to electrocution. Disconnect the power supply before
carrying out any maintenance and/or repair work.
The use of this machine on a circuit which is not grounded may
cause death due to electrocution. Never disconnect or disable
the grounding conductor. Consult an electrician if the ground
conductor is missing or it is suspected that the circuit is not
suitably grounded.
The use of this machine with a damaged power supply cable
may cause electric shock. Check the power supply cable
regularly for damage such as splitting or wear and tear. DO
NOT use the machine if the power supply cable is damaged.
DO NOT use the electric cable to move
the machine.
Bona Scorpion Manual