Pentair INTELLIPOOL AUTOMATION Guía De Instalación Y Usuario página 11

230V + Probe unit connection Control center
The Control center need to be placed near the electrical panel to optimise the electricals connections. Connect the 230V. Engage the 230V only at the end of the
electrical installation. Connect bus cable on Datas and Power from Control center to Probe unit.
IntelliPool®, Control center on Probe unit and pool cover connection
1 - Connect the 220V.
2 - Connect the IntelliFlo® cable ref 350122 / long 15m provided with the IntelliPool®.
3 - Connect the green cable on Datas+ and connect the yellow cable on Datas-.
Each bus connection (Intelli
range) have to be plugged
following this principe.
> Control Center
NEUTRAL (N)
EARTH
PHASE (L)
3
1
2
Dry contact closed when cover
close the pool.
pool cover
electrical panel
9