Contents Of Packaging - Pentair INTELLIPOOL AUTOMATION Guía De Instalación Y Usuario

Contents of packaging

1 - Control center
3 - Probe unit (and its 4 probes, delivered separately)
5 - Outdoor radio relay
7 - pH calibration solutions
9 - RJ45 cable
11 - 8 x AA batteries ProCell high temperature resistant
13 - Internet relay
15 - 12 mm diam. gland x3 for pH/ORP/Conduct probes
12 /07/ 13 1 5:23: 48
Wa ter temp :+24. 0° C
pH :7,3 O RP:62 9mV
Co nd:5 571u S 3.5 1g/l
ESC
CONTROL CENTER ENTER
4 7
7
6 8
Introduction
Your new IntelliPool® system will bring you a fully automated management of your swimming pool system. It controls and manages the quality of
the water and enables remote access to all comfort functions of your pool also for your poolbuilder; The result is a safer pool environment.
IntelliPool® will also generate substantial savings in operating your pool. Its unique control of the IntelliFlo® variable speed pumps guarantees
the lowest possible power consumption while maintaining optimum filtration and water quality. Savings up to 90% can be achieved. The automatic
control also minimizes the use of chemicals and will extend the life of a salt chlorinator.
IntelliPool® will furthermore adapt filtration, desinfection and other pool functions when the pool is covered.
What you will appreciate the most about IntelliPool® will be the increased convenience in using your pool. Controlling lights, heating and filtration
can be done everywhere anytime using any smartphone or tablet PC. Automatic backwash is possible using a specific backwash valve on the
filter.
IntelliPool® uses precision sensors and controls. Please follow the recommendations as described in this manual and use professional assistance
for the installation of your system.
This way the only thing left is to sit back and enjoy your pool !
IntelliPool® features
IntelliPool manage the variations speed and operating schedule of IntelliFlo
®
Specifics features (water falls, heating, IntelliChlor)
- Optimalisation IntelliFlo
®
- Automatic ON/OFF / Schedule mode
- Disinfection based on ORP (Redox) measure
- Supervision and pH dosage (pH+ or pH-) including empty tank information
- Conductivity measure to inform salt concentration
- Heating piloting and temperature setting
- Lighting ON/OFF, schedule mode and IntelliBrite color choice
Auxilliary output :
- Automatic backwash (with push/pull valve)
- Water feature (with a second pump or 3 way valve)
- ON/OFF , schedule mode, timer
All these features are both accesible directly on IntelliPool
x11
2
x7
pH
O.R.P.
1
Conductivity
9 10
or on smartphone / tablet
®
2 - Grommets for watertightness of electrical connections
4 - Indoor wireless display
6 - Outdoor remote control
8 - Silicon grease
10 - Internet relay power supply
12 - IntelliComm ® communication cable
14 - Hose clamp 50/70 mm diameter for temperature sensor
REDOX - PH
TEMPERATURE
PROBE UNIT
CONDUCTIVITY
8 x AA
11 12
depending on: Water temperature / Position of the pool cover /
®
5
3
4
13 14
x3
15
3