EN GLIS H
B - C r e a m
from the manufacturer (see figure 13).
figure 13
3 Every month: remove the dust from the condenser filter on
the back of the machine (see figure 14).
figure 14
ATTENTION
Beware of the condenser fins as they are sharp.
6. 1 MAINTENANCE (TO BE CARRIED OUT BY
QUALIFIED SERVICE PERSONNEL ONLY)
IMPORTANT
The dispenser wiring diagram is shown on the inside of
the tap side panel.
IMPORTANT
In order to prevent damage to the dispenser, the plastic
parts must only be lubricated with the grease supplied by
the manufacturer or with another type of grease compati-
ble with plastic parts.
1 Annually: Remove all the panels and clean the inside of
the machine including the base and the inside of the panels.
Never remove the anti-condensation material wrapped around
the evaporator outlet tube (the copper tube located to the right
of the geared motor). If said material is missing or lost, replace
with original spare parts from the manufacturer.
2 Remove any traces of product from the inside of the
evaporator by removing the tray as shown (see figure 15).
18
figure 15