Publicidad
Idiomas disponibles
Idiomas disponibles
pH330i/340i
Calibration
PH
" &
| ,
|
Note
At this point, the AutoCal TEC calibration can be terminated with
<M>. This corresponds to a two-point calibration.
•
Immerse the pH electrode in the second buffer solution to continue the
two-point calibration.
• When measuring without a temperature sensor:
Enter the temperature of the third buffer solution with < A > < T > .
•
Press <RUN/ENTER>. The AutoRead measurement begins. The elec-
trode voltage (mV) or the buffer nominal value appears on the display.
P
H
>, •
If the measured value is stable, the instrument displays the value of the
m
v / J |
slope and the evaluation of the three-point calibration.
-5
P
H
\
•
Press <RUN/ENTER>. The instrument displays the value of the asymme-
f l i * I
trv
-
U
• Switch to the measuring mode with <M>.
Publicidad
Capítulos
