Ebode HD120IR Manual De Usuario página 6

6. Frequently Asked Questions
Q: Yellow Light of LAN port is flashing but slowly.
A: 1) Check whether HDMI Extender TX and HDMI Extender RX is reversed.
2) Check whether HDMI Source device output HDMI signal correctly.
3) Change the HDMI cable of TX.
Q: Yellow Light of LAN port is flashing quickly but no display.
A: 1) If HDMI source is graphics card, please set the resolution to be supported by
display device.
2) Check whether HDMI cable of RX is well connected.
3) Change the HDMI cable of RX.
Q: Yellow Led light LAN port is not light.
A: 1) Check connection of network cable.
2) Network cable is too long.
Q: Abnormal colour display or flashing after all devices are well connected.
A: 1) Please press the reset button of your HDMI Extender
2) Follow the standard of IEEE-568B
Q: IR Remote does not work.
A: 1) Incorrect placement of IR blaster and Receiver may result in the failure of the
IR extenders, please check carefully before plugging in the IR extender.
2) Make sure the frequency is 38kHz.
Please visit
30-9-2014
www.ebodeelectronics.eu
latest manual, Software and FAQ.
6
for
ebode HD120IR