Operation Procedure - Reflecta cubus 251 Manual De Usuario

User Manual Overhead Projector reflecta cubus 251, 253 and 401, 403

OPERATION PROCEDURE

1. Adjust the post to the vertical position as Fig. 1 and Fig. 2, it will self -lock tightly.
Note: Before switch on the machine, please measure the local voltage to select the
input voltage, we suggest select 220v when the voltage is on alternating current
200V-230V. When the voltage > 230V, should choice 240V in order to enhance the
lamp's working time.
Connect the power supply and switch on the "on/off" switch, the machine will start
working immediately.
Fig. 1
2. Refer to Fig. 3 to transfer the lamp.
+ color fringing adjusting ring
Fig. 3
Refer to Fig. 4 to open the top cover.
Fig. 2
Fig. 4
5