Important Safeguards - Reflecta cubus 251 Manual De Usuario

User Manual Overhead Projector reflecta cubus 251, 253 and 401, 403

IMPORTANT SAFEGUARDS

When using your overhead projector, basic safety precautions should always be followed,
including the following:
1. Read the following instructions carefully before operating the overhead projector.
2. Make sure that the operating voltage of the overhead projector corresponds to your
local voltage.
3. Care must be taken to ensure the smooth airflow of the cooling system. Take care that
the Projector is placed on a sturdy, flat surface. Immediately switch off the machine if
the cooler is not functioning properly.
4. To reduce the risk of electric shock, do not disassemble this appliance, but take it to a
qualified technician when service or repair work is required. Incorrect reassembling
can cause electric shock when the appliance is used subsequently.
5. Tilt up the projection mirror before switching on the overhead projector.
6. Always unplug appliance from electric outlet before opening the cover for cleaning,
servicing, lamp changing and when not in use. Never tear cord to pull plug from outlet.
Grasp plug and pull to disconnect.
7. Let appliances cool completely before replacing the lamp. Attention! Care must be
taken as burns can occur from touching hot parts!
8. To avoid the potential electrical shock, do not expose this overhead projector to rain,
moisture, or other liquids.
9. Let overhead projector cool completely before putting away.
10. Do not let cord hang over edge of table or counter or touch hot surfaces.
11. Close supervision is necessary when any appliance is used by or near children. Do not
leave appliance unattended while in use.
A Safety Interlock is located on the edge of the cabinet. When the platen of
the overhead projector is opened, the power supply will cut off. Please
make sure the appliances is unplugged during repair to avoid electric stock
1