Utilisation; The Attachments - Silvercrest SPM 6200 A1 Instrucciones De Uso

Utilisation

The attachments

GB
MT
44
7:
■ Sapphire cone
For removing dry skin, hardened skin or callouses on the soles and heels,
and to process the nails.
Guide the sapphire cone 7 with a circular motion and under gentle pressure
over the parts of the sole and heel to be treated. Do not exert too strong
a pressure and always make contact carefully with the appliance on the
surface to be treated. After every treatment apply a moisturising cream.
8:
■ Felt cone
For smoothing and polishing nail edges after fi ling, as well as cleaning the
nail surface.
Use the felt cone 8 to polish and smooth the edge of the nail and to clean
the nail surface after milling. Always polish in a circular motion and never let
the felt cone 8 rest in one place.
9:
■ Sapphire disc
For fi ling and processing the nails..
Process the edge of the nails with the sapphire disc 9. As only the inner disc
rotates and the outer edge does not move, you can fi le your nails accurately
without damaging your skin with the rapidly rotating disk. Always work from
the outside of the nail to the tip.
0:
■ Cylindrical miller
For milling thickly growing toe nails and rough smoothing of the surfaces.
With the cylinder miller 0 you can mill away thickly growing nail surfaces.
Always hold the cylinder miller 0 parallel to the nail surface and, with light
pressure and circular movements, remove the excess growth.
q:
■ Flame miller
To release ingrown nails.
With the fl ame miller q you can release ingrown nails. Guide the fl ame
miller q carefully onto the treatment area and cut away the aff ected nail
part.
■ Round sapphire miller
For the removal of corns.
w:
SMP 6200 A1