Indication Channels - Sonnenkraft SKSC2 Manual Del Usuario

Indication channels

4.1.1 Indication of collector temperatures
COL, COL1, COL2:
Collector temperature
display range:
-40 ... +250 °C
4.1.2 Indication of store temperatures
TST, TSTL, TSTU,
TST1, TST2:
Store temperatures
Display range:
-40 ... +250 °C
4.1.3 Indication of sensor 3 and sensor 4
S3, S4:
Sensor temperatures
Display range:
-40 ... +250 °C
4.1.4 Indication of other temperatures
TFSB, TRET, TFL, TRF:
Other mea suring
tempe ratures
Display range:
-40 ... +250 °C
4.1.5 Indication of current pump speed
n %, n1 %, n2 %:
Current pump speed
Display range:
30 ... 100 %
4.1.6 POOL
POOL:
Swimming pool charging
Setting range: ON
Factory setting:
OFF ... ON
Shows the current collector temperature.
• COL : collector temperature
(1-collector-system)
• COL1 : collector temperature 1
• COL2 : collector temperature 2
Shows the current store temperature.
• TST : store temperature
(1-store-system)
• TSTL : store temperature lower
• TSTU : store temperature above
• TST1 : temperature store 1
• TST2
: temperature store 2
Shows the current temperature of the correspon-
ding additional sensor (without control function).
• S3 : temperature sensor 3
• S4 : temperature sensor 4
Please note:
S3 and S4 are only indicated if the temperature
sensors are connected.
Shows the current temperature of the correspon-
ding sensor.
• TFSB : temperature solid fuel boiler
• TRET : temperature heating reverse raising
• TFL : temperature forward fl ow
• TRF : temperature return fl ow
Please note:
TFL/TRF is only available in case of an activated
option heat quantity measurement (OHQM).
Shows the current pump speed of the correspon-
ding pump.
• n % : current pump speed
(1-pump-system)
• n1 % : current pump speed pump 1
• n2 % : current pump speed pump 2
Enables the activation or deactivation of the
POOL function
17