Service; Extended Reach Pole Saw Safety; Pole Saw Safety Warnings - Oregon PS750-092 Manual Original De Instrucciones

• Use the power tool, accessories and
tool bits, etc. in accordance with these
instructions taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool
in unexpected situations.

Service

Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.

Extended Reach Pole Saw Safety

• Keep all parts of the body away from the
saw chain. Do not remove cut material
or hold material to be cut when blades
are moving. Make sure the switch is off
when clearing jammed material. Saw chain
continues to move after the switch is turned
off. A moment of inattention while operating
the extended-reach pole saw may result in
serious personal injury.
• Carry the extended-reach pole saw by the
handle with the saw chain stopped. When
transporting or storing the extended-
reach pole saw, always fit the saw
chain device cover. Proper handling of the
extended-reach pole saw will reduce possible
personal injury from the saw chain.
• Hold the extended-reach pole saw by
insulated gripping surfaces only, because
the saw chain may contact hidden wiring.
A saw chain contacting a "live" wire may make
exposed metal parts of the extended-reach
pole saw "live" and could give the operator an
electric shock.
• Do not use the extended-reach pole saw
in bad weather conditions, especially
when there is a risk of lightning. This
decreases the risk of being struck by lightning.
Pole Saw Model PS750-092
Important Safety Information
• To reduce the risk of electrocution, never
use near any electrical power lines.
Contact with or use near power lines may
cause serious injury or electric shock resulting
in death.
• Always use two hands when operating
the extended-reach pole saw. Hold the
extended-reach pole saw with both hands to
avoid loss of control.
• Always use head protection when
operating the extended-reach pole saw
overhead. Falling debris can result in serious
personal injury.

Pole Saw Safety Warnings

DANGER: Contact with a moving saw
chain will result in serious personal
injury. Keep hands and body away from
moving saw chain.
DANGER: Contact with electrical wiring
during use may cause exposed metal
parts of the tool to become live, resulting
in serious personal injury. Always hold
the pole saw by the insulated gripping
surfaces during operation.
WARNING: The use of an improperly
assembled pole saw may result in serious
personal injury. Only use this tool after it
has been properly assembled according to
"Preparing for Use" in this manual.
WARNING: Moments of inattention
during operation of the pole saw may result
in serious personal injury. Before starting the
pole saw, minimize all distractions, keep body
parts away from saw chain, and make sure the
chain is not in contact with any objects.
7