Mounting The Stove; Selecting The Installation Location; Installing The Stove - Dometic ORIGO 2000 Instrucciones De Uso

_Origo_2000_2500_4100_4300.book Seite 12 Freitag, 8. Januar 2010 3:35 15

Mounting the stove

7 Mounting the stove
You can fit the stove into the countertop of your kitchen.
7.1

Selecting the installation location

When selecting the installation location, observe the following instructions:
Select a well-ventilated location for the device.
Avoid draft at the installation location.
If you fit the stove in an open cockpit or other open areas mount an
additional wind protection.
Do not operate the device in spaces where danger of explosion is
present.
7.2

Installing the stove

Caution – Danger of damaging the device!
a
Before drilling any holes, make sure that no electrical cables or oth-
er parts of the vehicle can be damaged by drilling, sawing and filing.
Cut a rectangular hole into the countertop (dimensions see following
table):
Model
2000
2500
4100
4300
Open the top and remove the canisters.
Place the stove in the middle of the cutout.
Mark the drill holes.
Use the drill holes at the rim of the stove as template.
Pre-drill the holes into the countertop where marked.
Fasten the stove by screwing flat head screws through each drill hole at
the rim.
Place a class B-1 fire extinguisher in reaching distance.
12
Dimensions in mm
345 x 320
345 x 320
575 x 320
575 x 320
Dometic ORIGO