Error Messages - KERN KMN-TM Manual De Instrucciones

7 Error messages

Error code
Err 3
Err 4
Err 6
Err 35
Err 70
Weighing terminal
switches off
automatically
Weighing terminal
cannot be switched
on
Error
EEPROM error
Number of reference parts too
small
EEPROM read/write error
Weighing platform in motion
when calibrating
Keypad error
Underload
Overload
Zero setting outside zero setting
range
• Automatic power off enabled
• Battery voltage too low
Fuse blown
Remedy
➜ Switch weighing terminal off
and on
➜ Put on additional reference
parts
➜ Contact your dealer or local
representative.
➜ Ensure that the weighing plat-
form is quiet
➜ Contact your dealer or local
representative.
➜ Unload weighing platform
➜ Press
➜ If the message reappears,
contact your dealer or local
representative.
➜ Decrease load
➜ Unload weighing platform
➜ Switch on weighing terminal
➜ Load battery
➜ Contact your dealer or local
representative.
27