Trevi Tablo Q Manual Del Usuario página 30

Tabla de contenido

Publicidad

To power off the device:
Long press
button (3) for 2 seconds, the screen will show the power off options:
"Power off" or "Reboot". Tap "Power off" to turn off the unit or tap the display to exit to
previous operation.
Note
When the device is low battery, it will alert continuously and will shut down automatically
when battery has completely run out. The device cannot be powered on if the battery is
empty, please recharge the battery at least one minute before restart the device.
Standby and Lock screen
Press
button (3) shortly to turn the device to standby mode. Under standby mode, the
screen is blackout and volume is muted. Press
button (3) shortly again to reactivate
the device. The device will then turn to Lock screen while the primary operation of the
device will continue.
Unlock the screen by sliding
to the right to resume to status before power saving.
Note
The primary operation of the device under standby mode will pause and the primary
operation of the device under Lock screen mode will continue, only the screen is locked.
30

Publicidad

Tabla de contenido
loading

Tabla de contenido