Wi-Fi Network Settings - Trevi Tablo Q Manual Del Usuario

Orientation Sensor Setting
The device contains a sensor that will automatically change the orientation of screen by
90 degree as you rotate the tablet. The sensor works the best when the tablet is rotated
perpendicular to the ground.
The Orientation sensor can be activated or deactivated in the Setting menu: Accessibility
- Auto-rotate screen. Moves the switch if you want to activate or deactivate this function.
Battery management and recharging
a. Recharge the battery about 6 hours to make sure the battery is fully charged at the
first time.
b. Plug in the power charger provided in the accessory pack to the DC-5V (Micro USB)
located on the up side of the device and connect the power charger to a proper power
socket. Once the power is connected, the battery recharging icon will appear
status bar which indicating that the device is under recharging. When the power recharging
icon will turn to blue entirely when the battery is fully recharged and you can disconnect
the power charger from the device.
Note
In order to keep the battery in the best condition, please pay attention to the below:
• Don't recharge the device under high temperature.
• Don't release the power of the battery, you can charge the battery when there is still
power in the battery. It is not necessary to wait the battery to completely run out before
recharging.
• To maintain the battery with a long life span, keep recharging the battery once every
two weeks in the case if you don't use the device for a long time.
To install an Application from Play Store:
• Select the "SETTINGS" and then the command "ACCESSIBILITY."
• Locate the command "GOOGLE APPLICATION" and activate its switch on the right (from
gray to green).
• In the application's page, you will see the "PLAY STORE" icon.
• Select the Play Store icon and search the application desired after you create an
account on Google's GMAIL.

WI-FI network settings

From desktop, Tap
desired WI-FI network and enter the wireless network setting page.
to enter setting menu and slide WI-FI function to ON and tap the
32
on the