Power Management - Sharp LL-T1811W Manual De Funcionamiento

The DVI-I input connector pin
(DVI-I connector with 29 pins)
No. Function
1 TMDS data 2-
2 TMDS data 2+
3 TMDS data 2/4 shield
4 N.C.
5 N.C.
6 DDC clock
7 DDC data
Analogue vertically synchronised
8
signal
9 TMDS data 1-
10 TMDS data 1+
11 TMDS data 1/3 shield
12 N.C.
13 N.C.
14 +5V
15 GND

Power management

The monitor is based on the VESA DPMS*1 and the
DVI DMPM*2 standards.
To activate the monitor's Power Management func-
tion, both the video card and the computer must
conform to the VESA DPMS standard and the DVI
DMPM standard.
*1 DPMS: Display Power Management Signalling
DPMS mode Screen
consumption
ON Display on
STANDBY
SUSPEND Display off
OFF
*2 DMPM: Digital Monitor Power Management
DMPM mode Screen
ON Display on
OFF Display off
Specifications
No. Function
16 Hot plug detection
17 TMDS data 0-
18 TMDS data 0+
19 TMDS data 0/5 shield
20 N.C.
21 N.C.
22 TMDS clock shield
23 TMDS clock +
24 TMDS clock -
C1 Analogue red image signal
C2 Analogue green image signal
C3 Analogue blue image signal
Analogue horizontally
C4
synchronised signal
C5 Analogue GND
Power H-sync V-sync
44W Yes Yes
No Yes
3.2W Yes No
No No
Power
consumption
44W
3.2W
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data
Channel) standard.
DDC is a signal standard for carrying out Plug &
Play functions on the monitor or PC. It transfers
information such as degree of resolution between
the monitor and PC. You can use this function if your
PC is DDC compliant and if it is set so that it can
detect the Plug & Play monitor.
There are many varieties of DDC due to the differ-
ences between systems. This monitor works with
DDC1 and DDC2B.
28