Purpose And Content Of The Manual; Target Group; Storing The Use And Maintenance Manual; On Delivery Of The Appliance - Fimap Broom Manual De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
The aim of this manual is to provide customers with all the information
needed to use the appliance in the safest, most appropriate and
most autonomous way. It includes information concerning technical
aspects, safety, operation, appliance downtime, maintenance, spare
parts and scrapping. Operators and qualified technicians must read
This manual is aimed at operators and qualified technicians
responsible for appliance maintenance. Operators must not perform
operations that should be carried out by qualified technicians. FIMAP
The Use and Maintenance Manual must be stored in its special
pouch close to the appliance, protected from liquids and anything
When the machine is delivered to the customer, an immediate
check must be performed to ensure all the material mentioned in
the shipping documents has been received, in addition to verifying
that the equipment has not been damaged during transportation. If
Any type of equipment can only work properly and effectively if used
correctly and kept in full working order by performing the maintenance
operations described in the attached documentation. You should
therefore read this instruction manual carefully, consulting it again
if issues arise while using the machine. If necessary, remember that
Broom is an electric battery-powered brush designed for cleaning
dry surfaces in both outdoor and indoor environments. The appliance
has: a central brush for collecting the dirt, two side brushes for
This electric brush was designed and built to be used by a qualified
operator to clean smooth, compact flooring in the commercial,
residential and industrial sectors, in proven safety conditions.
The appliance is only suitable for use in indoor - or at least covered
- areas. The appliance is not suitable for use in the rain, or under
jets of water.
Operator cooperation is paramount for accident prevention. No
accident prevention programme can be effective without the full
co-operation of the operator who is directly responsible for machine
operation. The majority of occupational accidents that happen both
in the workplace or whilst moving are caused by failure to respect
The serial number plate is located on the lower part of the appliance,
indicating its general characteristics (in particular, the serial number).
The serial number is a very important piece of information and should
always be provided together with any request for assistance or when
purchasing spare parts.

PURPOSE AND CONTENT OF THE MANUAL

TARGET GROUP

STORING THE USE AND MAINTENANCE MANUAL

ON DELIVERY OF THE APPLIANCE

INTRODUCTORY COMMENT

TECHNICAL DESCRIPTION

INTENDED USE

SAFETY

SERIAL NUMBER PLATE

the instructions in this manual carefully before carrying out any
operation on the appliance. If in doubt about the correct interpretation
of instructions, contact your nearest Customer Service Centre to
obtain the necessary clarifications.
SpA cannot be held liable for damages resulting from failure to
comply with this prohibition.
else that could compromise its legibility.
this is the case, the carrier must ascertain the extent of the damage
at once, informing our customer service office. It is only by prompt
action of this type that the missing material can be obtained, and
compensation for damage successfully claimed.
our assistance service (organised in collaboration with our dealers)
is always available for advice or direct intervention.
cleaning in corners, and a debris hopper for holding the dirt. Do not
use the appliance for purposes other than the one indicated above.
WARNING: it is forbidden to use the appliance for picking up
dangerous dusts or inflammable liquids in places with an
explosive atmosphere.
the most basic safety rules. An attentive, careful operator is most
effective guarantee against accidents and is fundamental in order to
implement any prevention programme.
Design by FIMAP Verona (Italy)
Assembled in FIMAP Verona (Italy)
Via Invalidi del Lavoro, 1 S. Maria di Zevio - Verona - Italy
14

Publicidad

Tabla de contenido
loading

Tabla de contenido