Handling The Packed Appliance; How To Unpack The Appliance; How To Transport The Appliance; Battery Type - Fimap Broom Manual De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
Move the package using the handle. The overall weight of the
appliance with its packaging is 4.5 kg (weight of the empty machine
plus accessories and packaging). Since the packaging elements
(plastic bags, staples, etc.) are a potential source of danger, they
should not be left within the reach of children, disabled persons, etc.
The procedure for removing the device from its packaging is the
following:
1. Open the outer box.
2. Remove the accessories from the box and carefully lay them on
the ground.
3. Take the appliance out of the box.
The procedure for the safe handling of the device is the following:
1. To remove the power battery (1) from the appliance, you must first
free it by shifting the stop lever (2) towards the outer part of the
machine. Lift the battery out of the appliance (Fig. 1).
2. Rotate the command handlebar in the direction of the arrow (Fig. 2).
3. Close the command handlebar, pushing the handle towards the
main part of the appliance (Fig. 3).
4. Rotate the command handlebar in the direction of the arrow (Fig. 4).
2
1
1
To power the appliance, use only the battery supplied in the package
or by a specialised technician.
For maintenance and recharging, respect the instructions provided
by the battery manufacturer. When the battery is run down, you must
take it to an authorised disposal centre.
The battery is classified as dangerous waste, so it is compulsory
to take it to an authorised disposal centre.
For good battery maintenance, follow these indications:
• Do not attempt to open the batteries for any reason whatsoever.
• Do not let the battery get dirty or wet.
• The battery must not be exposed to excessive heat (e.g. rays of
sunshine, flames, etc.).
• Do not leave the battery in places where the temperature could

HANDLING THE PACKED APPLIANCE

HOW TO UNPACK THE APPLIANCE

HOW TO TRANSPORT THE APPLIANCE

2

BATTERY TYPE

BATTERY MAINTENANCE AND DISPOSAL

17
The dimensions of the package are as follows:
A :
370mm
B :
600mm
C :
170mm
Warning: it is recommended that all the packaging
components be kept for any future transportation of the
appliance.
Warning: you are advised to always wear protective gloves, to avoid
any risk of serious injury to your hands
Warning: when transporting the appliance on vehicles,
secure it according to the directives in force so that it cannot
slide or tip over.
Warning: you are advised to always wear protective gloves, to avoid
the risk of serious injury to your hands.
3
4
OTHER BATTERY TYPES CANNOT BE USED.
The appliance is powered by a lithium-ion battery. The battery
compartment can house a single 10.8V battery slot.
exceed 40°C.
• Always recharge the battery at a room temperature between 10°C
and 40°C.
• Recharge the battery using the power supply unit supplied with
the appliance.
• Do not attempt to recharge damaged batteries.
• The battery contacts must not touch metal parts, to avoid any risk
of short-circuits.
• The battery must be kept far from metal objects, to avoid any risk
of short-circuits.
• Do not throw the battery into the fire.
• Do not throw the battery away with domestic waste; respect the

Publicidad

Tabla de contenido
loading

Tabla de contenido