Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5) Switching off
1.
After you are finished cooking, switch off the induction hob by pressing the on/off button; the display
will show "OFF". The fan will still run for a while to cool the appliance.
2. When the fan stops, disconnect the appliance from the power outlet and let it cool entirely.
Large hotplate
1) Switching on
1.
After plugging the induction hob in the electric outlet you will hear a beep and you will see "OFF" on
the display.
2. Press the on/off button and the display will show "ON", the fan will start and the induction hob will
change from standby mode to heating mode.
3. The induction hob detects if you are using correct cookware. If yes, after the "ON" indicator shows on the
display, press the "Menu" button and you can select the cooking setting, the hob will switch on.
4. Otherwise, it is not possible to set cooking after pressing „Menu" button. You will hear repeated sound
signal and the display shows warning notice E0. The induction hob will switch to standby mode after 40
seconds.
GB
2) Setting the power level
1.
Press the "Menu" button and the light indicator of power "P" turns on.
2. After switching on, the power level is automatically set to 1600 W.
3. Set the desired power using the control knob in range 200 – 1600 W (10-stage settings altogether).
3) Setting the temperature
1.
Press the "Menu" button twice and the light indicator of temperature "°C" turns on.
2. After switching on, the temperature is automatically set to 240 °C.
3. Using the control button, set the temperature to required level in the range of 60–240 °C (10 stage
temperature control).
4) Setting the timer
-
when the power stage is set
1.
Press the "Menu" button the third time, the power level indicator will light up and the timer control; the
display will show "0:00".
2. Using the control button set the required time in the range of 0:01 – 3:00. The setting advances by
1 minute.
3. After setting the timer wait, until the display shows the preset power setting 1600 W. Then using the
control button set the required power level.
-
when the temperature is set
1.
Press the "Menu" button the fourth time, the temperature level indicator will light up and the timer
control: the display will show "0:00".
2. Using the control button set the required time in the range of 0:01 – 3:00. The setting advances by
1 minute.
3. After setting the timer wait, until the display shows the preset temperature 240 °C. Then, using control
button, set the required temperature.
5) Switching off
1.
After you are finished cooking, switch off the induction hob by pressing the on/off button; the display
will show "OFF". The fan will still run for a while to cool the appliance.
2. When the fan stops, disconnect the appliance from the power outlet and let it cool entirely.
CLEANING AND MAINTENANCE
Before cleaning and any handling of the induction hob, unplug it from the power outlet and allow the hob
to cool!
48
Publicidad
Tabla de contenido
