Unitek DELTA Serie Manual Del Usuario página 16

2.6.4.2 Output Voltage Setting
! Press and hold the main off switch "
" to select the output voltage setting mode
! Press and hold the main on switch " I " for more than 3 seconds to select different output voltage settings.
All Level LEDs off 6th Level LED on
Output =115V(230V) Output =110V(220V)
2.6.4.3 AVR Buck Range Setting
! Press and hold the main off switch "
" to select the AVR Buck Range Setting mode.
! Press and hold the main on switch " I " for more than 3 seconds to select different AVR Buck ranges.
AVR Buck Range mode All Level LEDs off
AVR Buck = +25%
2.6.4.4 AVR Boost Range Setting
! Press and hold the main off switch "
" to select the AVR Boost Range Setting mode.
! Press and hold the main on switch " I " for more than 3 seconds to select different AVR Boost ranges.
AVR Boost Range mode All Level LEDs off
AVR Boost = -25%
2.6.4.5 Energy saving mode
! Press and main off switch " " to select the
energy saving mode.
5th Level LED on 5th, 6th Level LED on
Output =120V(240V) Output =127V(208V)
6th LED on All LEDs off
AVR Buck = +30% AVR Buck = +20%
6th Level LED on 5th Level LED on
AVR Boost = -30% AVR Boost = -20%
! Press and hold the main on switch " I " for more than 3
seconds to select different energy saving modes.
All Level LEDs off 6th Level LED on
UPS in energy saving mode UPS in normal mode
31
2.7 Audible / Visual Indicators
! Audible / Visual Indicators
#
- - - -
#
- - - -
#
- - - -
#
- - - -
#
- - - -
#
- - - -
#
- - - -
- - - - -
!
Battery Capacity Indicators
LED1 LED2 LED3 LED4 LED5 LED6
# # # # $
# # # $
-
# # $
- -
# $
- - -
$
- - - -
! Load Size Indicators (AC Normal)
LED1 LED2 LED3 LED4 LED5 LED6
#
- - - -
# #
- - -
# # #
- -
# # # # #
# # # # #
# # # # #
# # # # #
! Load Size Indicators
(Backup Mode)
LED1 LED2 LED3 LED4 LED5 LED6
X X X X X
X X X X X
#
: LED on
$
: LED flashing
-
: LED off
X : any status
Buzzer Operating Status
- - AC buck mode
- - AC normal
- - AC boost mode
- Beeps continuously UPS fault
Beeps in every 4
- Backup mode
seconds
Beeps in every 15
- Backup time over 30 minutes
seconds
Beeps in every 0.5
- Energy saving mode
second
#
Beeps continuously Battery is dead
Buzzer Operating Status
Beeps in every 4 Battery capacity=100%
-
seconds
Beeps in every 4 Battery capacity=80%
-
seconds
Beeps in every 4 Battery capacity=60%
-
seconds
Beeps in every 4 Battery capacity=40%
-
seconds
Beeps in every Battery
-
seconds Battery will be running out
Buzzer Operating Status
- Load size 20%
-
- Load size 40%
-
- Load size 60%
-
- Load size 80%
-
Beeps in every Load size 100%. UPS full load.
#
seconds Remove the non critical loads.
Beeps 2 times in Load size = 110%. Remove the non
#
every second critical loads
Beeps 2 times in Load size =140%. Remove the non
#
every 0.5 second critical loads or UPS shuts off in 2
minutes.
Buzzer Operating Status
Beeps in every UPS full load. Remove
#
second the non-critical loads.
Beeps 2 times in UPS overload. Remove
#
every second the non-critical loads
within 20 seconds
32
capacity=20%,