Commissioning - HSGM HSG-0 Instrucciones De Uso

Commissioning

1
2.
Release the two clamping screws,
insert the cutting blade and tighten the
clamping screws.
3
Press the trigger; the cutting blade is
heated and the cutting area illuminated.
5
After use, release the trigger. Pull the
plug out of the socket when you have
finished working.
1.
1.
2
Plug into a suitable socket.
4
After 6-8 seconds, the cutting blade has
reached operating temperature.
6
Clean the cutting blade with a brass brush
while still warm.
7
6-8
sec