Juguetronica VR Smartview Manual De Instrucciones página 11

HOW TO RESET YOUR MICRODRONE
If the drone presents a defect in the operation that you
have not been able to recover with the trimming operation,
you can return to the factory settings. To do this, place the
microdrone Smartview on a flat, horizontal surface. Then
move both levers to the lower left corner (see picture) for
2-3 seconds. The led indicators of the drone start flashing
quickly. After about 2 or 3 seconds, you will see that the
drone of the LED indicators turn to light steadily. The reset process was done correctly.
USE OF THE SMARTPHONE
There are several functions of your microdrone Smartview of which you can enjoy through
your smartphone. For this, you must download the App via official product web:
www.juguetronica.com/extras/vr-microdrone-smartview
After already installed the app, connect the drone to generate the Wi-Fi. Search on your
smartphone Wi-Fi and connect your phone and connects it to your smartphone (not
password need). Then open the App. When you access the App, you will see on your screen
smartphone transmission in real time of what is capturing the drone's camera.
Camera
At the top of the screen area, you will see that you can choose either the photo button as
the video. A simple tap on the icon
icon, the camera starts recording a video. Back to press to finish the recording. All files,
both photos as videos, automatically are saved on your smartphone. The App itself includes
an instruction manual to learn how to edit features such as the transmission speed or the
folder where they keep the videos.
To use the camera as you control the drone with the control, slide the phone (left picture)
until to be embedded and centralized (right image) in the support.
Control drone
The App offers the possibility to control the drone by your smartphone using it instead of
the control. For this, you should switch off to On the second button starting with the right of
the main application screen. Instead of the camera image transmission, the display shows
two virtual levers (see picture) you can use to manage the drone instead of control levers. To
start the drone, you must press the button
correspond respectively to the start and automatic landing.
FPV experience with VR Drone Glasses
To use the drone with Drone VR Glasses (included), tap "adjustments" of the App, represented
by the icon and select the icon
image is divided into two to fit the vision of glasses. Then remove the glasses holder (see
picture 1), place your phone in the sense that shows the image 2 and reintroduces support
in glasses with smartphone inside. So get yourself the glasses and adjust the distance and
focus of the lens using the upper buttons (image 3) to obtain an optimal visualization. Now
you can start to fly!
1
generates an automatic capture. If tap on the
in the mobile menu. You will see that the camera
2
3
. Then the icons appear available
ADVICE:.
With
Glassesat first the perception of the
displacement carries some difficulties
and, briefly, can delay the latency
Wi-Fi transmission So before using it
reminds yourself: fly in a open space,
if possible, indoors. • Never fly under
wind conditions. • Place the protective
housing of the drone. • Be sure that
the drone is perfectly trimmed.
and
VR Drone
11