Operation; Switch On The White Light; Switch Off The Light; Switch The Colour On/Off - DURAVIT 790846 Manual De Instrucciones

3: Sunrise
a 15 minute simulation of the lighting characteristics during daybreak.
4: Sunset
a 15 minute simulation of the lighting characteristics during Sunset.
5: Pulsed colours
pulses of a selected colour with a variable loop time.

5. Operation

CAUTION! Risk of eye injury from light beam.
> Do NOT look directly into the lighting elements.

Switch on the white light

> Press the "Light" button
White light is switched on.

Switch off the light

> Press the "Light" button
The light is switched off.

Switch the colour on/off

> Press the required colour button.
The coloured light is switched on.
16

Switching on a colour programme

> For colour programme 5: Press the required colour button.
> Press the required programme button "1" to "5".
Colour programme is switched on.

Changing intensity

Prerequisite: Coloured or white light is activated.
> Press the "-" or "+" button.
Intensity increases and decreases.

To alter the speed of the change in colour or the pulsing

Prerequisite: Colour programme 1, 2 or 5 is activated. The speed or the pulsing can
only be altered for these colour programmes.
> Press the "-" or "+" button.
Speed increases and decreases.

Change the battery

> Unscrew the 8 screws on the rear of the remote control.
> Push carefully with a thin metal pin from behind, through the screw holes for
loosening the front side of the remote control.
> NOTE! Do not remove the seal from the groove.
Change the battery.
> Dispose of the battery at a designated collection centre.
> NOTE! Check whether the seal fits into the groove.
Close the remote control once again.

6. Cleaning and Maintenance

Note!
Damage to the surfaces through the use of the wrong cleaning fluids or detergents.
Never use abrasive, aggressive or chemical cleaners.
17