Bergstrom FLEX POWER II Instrucciones De Montaje página 34

FLEX POWER II
EN
PIPE ASSEMBLY
Run 1/2" pipe and cable to the power unit.
11
Caution: pass through along with the original
pipes or cables, avoiding any sharp areas and
constrictions, and secure with cable ties.
Secure the most suitable coupling (90º or
12
straight with service port) in 1/2" pipe and
connect to the power unit. Connect the cable
from the condenser unit.
12
Connect the power cable to the power unit and
13
run to the battery (Az to (+)), (M to (-)).
Caution: pass through along with the original
pipes or cables, avoiding any sharp areas and
constrictions, and secure with cable ties.
12 12
13
34
11
12
13