Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
D00146EN - v3
Instructions manual
TOUCHLESS SWITCH
SMART-PROX
0 - CONTENTS
1. DESCRIPTION
5. WIRING TO THE DRIVE
5.1. VISIO DRIVE WIRING
6.
8.
TOUCHLESS SWITCH SMART-PROX - INSTRUCTIONS MANUAL
TRANSLATED DOCUMENT
Read these instructions fully and carefully
before starting to use the unit.
In this manual you will find all the information
necessary for the installation, use and care of
the product.
Keep this manual in a safe place for later
reference.
It works in the same way as a traditional pushbutton,
causing the automatic door to open.
However, unlike traditional pushbuttons, the activation is
achieved with no need for physical contact with the device.
Simply bring your hand or elbow close to the detector and it
will send the opening command to the door. This distance
can be regulated between 5 and 35cm.
The opening command can be sent to the door using the
Manusa bus or using a potential-free contact (relay):
A blue LED will light, for one second, to confirm the
opening command has been sent to the door.
If the door cannot be opened (for example it is in closed
mode) the blue LED will blink (only with manusa bus
connection)
In case of malfunction a red LED will blink (only with
manusa bus connection).
2 - TECHNICAL FEATURES
Power supply
Consumption
Output
Detection distance
Operating temp. range
Dimensions
7
From 12 to 24V DC
30 mA
Manusa bus
or
Relay (N.O.)
Adjustable from 5cm to
35cm approx.
From 0° to 50°C
100x75x26
Publicidad
Tabla de contenido
