Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
D00146EN - v3
4. Fit the device cover with the Manusa Logo vertically:
5 - WIRING TO THE DRIVE
5.1. Visio drive wiring
a. Plug the telephone cable ends to any RJ-10 base
connectors of the Visio drive and of the touchless switch .
b. During the process the red LED (LED2) may flash.
c. Turn microswitch S1 to the position marked as B.M. (see
chapter 6 for details).
WARNING: Do not connect a second touchless switch
to the Manusa bus until the first one is operational.
TOUCHLESS SWITCH SMART-PROX - INSTRUCTIONS MANUAL
RELE connection: Visio, Bravo and Activa+.
Turn the microswitch S1 to the position marked as RELE .
5.2. Bravo drive wiring
5.3. Activa + drive wiring
9
*
*
*
*
Publicidad
Tabla de contenido
