TIPS FOR USE
1.
Place your grill in the desired position on a heat resisting surface.
2.
Insert the desired grill plates or waffle plates.
3.
lf using only one plate, bring the upper part in a vertical position.
4.
If you use both plates, lift the upper cover into a vertical position, then fit
the lateral crossbars into the kerbs of the lateral hin-ges.
5.
lf you need a larger grilling or roasting surface, or if you want to grill on the
riffled surface or roast on a smooth plate tilt the upper cover completely to
the back.
6.
The tilting grill plates can be removed by pressure on the fixing springs.
7.
Adjust the temperature control as desired and let the unit heat.
8.
When control lamps turn out, the required temperature is reached.
GRILLING AND ROASTING ON ONE/TWO SIDES
1.
If for grilling on one side the required temperature is reached, put the food
to be grilled on the lower plate and grill according to your taste.
2.
When contact grilling from both sides, both plates must be heated. Lay the
food on the lower plate and put the top cover directly on your steak by lifting
the cover slightly and then lowering it.
3.
Should you want to gratinate e. g. toasts, sandwiches, also heat both plates.
4.
To gratinate food in a plate, heat only the top plate. Please take care, that
the plate is quite flat and cannot slip from the bottom plate.
CAUTION:
The appliance becomes very hot during operation!
26
Copyright UNOLD AG | www.unold.de