MANUAL DE INSTRUCCIONES
J
.P. SELECTA s.a.u.
CÓDIGO 80404 REV 0
9.2 Connecting steps
· Install a thermomagnetic circuit breaker suitable to the power input of the unit
being installed.
· Connect the refrigerator unit to the thermomagnetic circuit breaker outlet.
· Check that the refrigerator is in order as demonstrated by the pilot light incorpo-
rated in the main switch coming on.
10 Maintenance instructions
The smooth operation and life of the equipment are mainly determined by correct
and regular maintenance.
10.1 Cleaning
Regular cleaning of the refrigerator unit is strongly recommended each month.
Please follow the instructions below.
Disconnect the refrigerator power supply cable from the mains prior to carrying out
any type of cleaning operation.
10.1.1 Cleaning the refrigerator surface
Clean the refrigerator with mild detergent and then dry it with a soft cloth.
Do not use abrasive detergents!
10.1.2 Cleaning inside of the refrigerator
Clean the inside area minimum each month with a detergent suitable for use with
samples.
10.1.3 Cleaning the condenser
For an efficient operation of the refrigerator, it is advisable to clean the condenser
regularly approx. every 4 months with a dry brush or vacuum cleaner.
11 Troubleshooting
Refrigerator stops working (light off):
- Power supply failure
· Solution:
- Check that the plug is inserted properly in the socket
- Check that the switch on/off
- Check that the mains voltage powers the plug
Refrigerator temperature goes up:
- Unit near to a heat source
- Condenser dirty or close
· Solution:
- Move the counter or the heat source further away
- Clean the condenser
12 Technical service
For technical service, please contact the dealer technical department or JP SELECTA's
technical service and provide the serial number, and the date of buy.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
09/2020
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Pag.: 11