Controller Configuration - J.P. SELECTA Stocklow LSC Manual De Instrucciones

INSTRUCTION MANUAL
Display and functions:
During normal operation, the controller displays the value of the probe set using parameter/4(=1 ambient
default probe, =2 second probe, =3 third probe).In addition, the display has LEDs that indicate the
activation of the control functions (see Table 1), while the 3 keys can be used to activate/deactivate some
of the functions (see table 2).
LEDs and associated functions
Table 1
function
icon
Compressor on
fan
defrost
aux
alarm
clock
Table of functions activated by the buttons‐models S, X, Y & C
Table 2
button
up
ON/OFF
down
defrost
set
mute
J
.P. SELECTA s.a.u.
CODE 80404 REV 0

13 Controller configuration

normal operation
ON
on
on
output on
all
RTC fitted and enabled,at
least 1 time band set
normal operation
pressing the button pressed
alone together
more than 3s toggle pressed
ON/OFF together
start/stop
continuous
more than 3s:
cycle
start/stop defrost
‐1s: display/set the
set point
‐more than 3s: access
parameter Setting
menu(enter
password 22)
‐mute audible alarm
(buzzer)
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
OFF
off
off
off
output off
no alarm
RTC not fitted or disabled,not
even 1 time band set
start up
‐
Pressed for 1s
together display
start firmware
parameter vers.code
reset
for 1s
procedure RESET
current
EZY set
09/2020 Page: 12
start up
blink
request ON
request ON
request ON
‐ ON
‐ ON
‐ ON if RTC
fitted
Tel 34 93 770 08 77 Fax 34 93 770 23 62