Battery Instructions - Max RB398S Manual De Instrucciones E Instrucciones De Seguridad

11. BATTERY INSTRUCTIONS

About the Battery Level Indicator
(1) To check the battery level (excluding while charging or while operating the charging tool), press the Battery level
check button.
(2) The Battery level gauge is on according to the battery level.
Battery level:
Battery level
gauge
All indicators
OFF
Service Life of the Battery pack
If any condition described below is observed, the Battery pack is at the end of its service life. Replace it with a new one.
Although the Battery pack has been properly charged (fully charged), a great drop in tying time has been noticed.
NOTICE
• Do not charge the Battery pack when this happens. If the motor's rotational speed slows down, the power of the Battery pack
is considered to be nearly depleted. Using the tool more will cause it to overdischarge, resulting in a shortened service life of
the Battery pack and also in functional trouble of the tool's main body.
• Do not use a Battery pack when its service life is finished.
This will cause functional trouble in the tool's main body. Also charging a Battery pack that is out of service life will lead to
functional trouble in the Charger.
Recycling a Li-ion Battery
The MAX battery pack uses a Li-ion battery, it may be illegal to dispose of this Battery into the municipal waste system. Check with your
local solid waste officials for details in your area for recycling options or proper disposal.
CAUTION
When disposing of the Battery pack, make sure to put a Pack cap on its Terminal (with insulating tape securing
it) to prevent short circuits.
Battery level check button
Battery level:
0% about 0 to 10%
One red
indicator blinks
Battery level gauge
Battery level:
about 10 to 40%
One red
indicator ON
13
Battery level: Battery level:
about 40 to 70% about 70 to 100%
Two red
indicators ON indicators ON
Three red