Maintenance Instructions - Desoutter D Serie Instrucciones De Servicio

2050497043
Issue 1
06/2005
LUBRICATION
This is a DRYLINE tool designed to operate
on a totally dry air line i.e.
one without any oil or water moisture.
DRYLINE tools can also operate on a
lubricated or partly lubricated air
line thus allowing easy interchangeability
with existing installations. If
lubrication is required an air line lubricator
should be fitted down stream
of the filter. Use ISO VG 15.

MAINTENANCE INSTRUCTIONS

1. Service should be carried out at
intervals of 1000 hours' use.
Always quote tool model number,
serial number and spare part
number when ordering spares.
2. All torque figures ± 10%.
3. When disposing of components,
lubricants, etc ...ensure that the
relevant safety procedures are
carried out.
4. Overmould should be wiped
clean with a general purpose,
nonaggressive degreasant.
5. Indicates direction of dismantling.
EN
NEVER CONNECT A PART
ASSEMBLED TOOL TO
THE AIR SUPPLY.
THE ROTOR BLADES IN THIS
TOOL HAVE A PTFE
CONTENT. THE NORMAL HEALTH
AND SAFETY
RECOMMENDATIONS
CONCERNING PTFE MUST BE
OBSERVED WHEN HANDLING
THESE ROTOR BLADES.
(1) DO NOT SMOKE.
(2) MOTOR COMPONENTS MUST
BE WASHED WITH
CLEANING FLUID AND NOT
BLOWN CLEAR WITH
AN AIR LINE.
(3) THE SILENCER MUST BE
REPLACED WHEN DIRTY,
DO NOT CLEAN AND RE-USE.
(4) WASH HANDS BEFORE
COMMENCING ANY
OTHER ACTIVITY.
WARNING