System Configurations - Sony VideoStore VSR-1000 Instrucciones De Funcionamiento

Overview

System Configurations

System configuration for realtime loading
With a system configuration like the one shown in the
figure below, bitstreams created by realtime encoding
can be loaded one after another (stored as video clips
on hard disk).
VST-1000/1000P
MPEG-2 Encoding Unit
Audio and video signals
VCR
a) Installing a BKSR-103 Clip Exchange Board (option) in the VSR-
1000 unit allows you to load MPEG-2 bitstreams from two VST-
1000/1000Ps simultaneously. With this setup, 5 Mbps is the only
data rate allowed.
b) Installing BKSR-101/101P/102 One-Channel/Two-Channel
Decoder Boards (option) in the VSR-1000 unit allows you to play
back or transmit video clips without interrupting loading operation.
The number of channels you can use for playback/transmission
depends on the type and number of decoder boards installed.
c) You can connect up to seven VSH-1000 Media Units to one VSR-
1000 unit.
6
Host computer
RS-232C or
RS-232C or
RS-422A RS-422A
RS-422A
MPEG-2
bitstream
SCSI-2
1 2 ... 6
a)
SCSI-2
1 2 ... 6
Program outputs
(analog signals) b)
VSR-1000 Media
Control Unit
(Status information)
VSH-1000
Media Unit
(Status information)
c)
VSH-1000
Media Unit
VSH-1000
Media Unit