Dirna bycool REVOLUTION Instrucciones De Montaje página 30

REVOLUTION
EN
Place the front on the front stud bolts with (1)
14
M6 wide-flange washer and (1) M6 nut on each
stud bolt. Tighten nuts until the channellers
meet the upper rubber of the equipment.
Important: The channellers must meet the
rubber to avoid air leaks.
14
EPDM
Seal
Cab roof
Upholstered
Tighten nut from point 13a until it meets the
15
upper part of the front.
15
EPDM
Seal
Cab roof
Upholstered
Place the console and centre the equipment on
16
the most suitable place on the cab roof. Once
centred remove the console.
Bycool Base
M6 Nut
M6 Stud bolt
Bycool Base
M6 Nut (13a)
M6 Nut
M6 Stud bolt
(A)
Channellers
Channellers
30
dirna
EPDM Seal
Front with small windows
Junta EPDM
Front with small windows
, s.a.