dirna Bergstrom bycool DINAMIC 1.2 Instrucciones De Montaje página 18

DINAMIC 1.2
EN ES
Assembly
Recommendations
• Before starting assembly, please read instructions
and follow them during installation process.
• Use the adequate tools for each operation.
Electricity
• Disconnect ignition key.
• Disconnect battery before starting assembly.
• Make sure electric components are securely
connected, checking their correct fitting.
! Warning
If the unit slants during assembly, wait for at
least 60 minutes with the unit in horizontal
position before starting it up.
Documentation included
Mounting instructions
User´s guide
Troubleshotting
Included parts
Warranty
Indications concerning position are:
RIGHT: Passenger side
LEFT: Driver side
Driving torques (N.m)
Steel Quality
Fillet
8.8
M6/100 10
Hoses assembly
Driving torques (N.m)
Hose size
1/4"
3/8"
220.AA1.1011
220.AA1.1012
220.AA1.1013
220.RE0.0079
220.AA1.0017
Wrench
opening
10.9
13 10
Fitting
Driving Tool
Torque
13-15 Wrench 14mm.
15-17 Wrench 19mm.
Ratchet wrench of 10
Cruciform screwdriver TOP 10
Wrench 10/11/14/17/19
Allen key of 6
Socket wrench of Ø 10
Broach Ø 4 / Ø 6 / Ø 9
Drill
Circular saw Ø 19 / Ø 22 / Ø 48
Scissors
Riveter M6
Fragile
Beware of cuts!
Electrical hazard
!
The installing personnel must have a sufficient training
in vehicles air conditioning.
!
dirna Bergstrom shall not be responsible
for breakdowns
an inadequate handling or installation of the
equipment or from modifications and substitutions
carried out without our express and written
authorisation.
!
Amount of refrigerant gas load R-134a to be
introduced in the circuit: 360 g.
!
Please see product warranty procedure included in
Troubleshooting diagnosis.
!
Please see equipment User's Guide for its correct
functioning of the remote control and control panel.
!
Once installation is finished, the following documents
must be handed over to the user: User's Guide,
Warranty and Troubleshooting.
18
Air conditioning for vehicles
Tools
Symbology
! Warnings
or damages coming from