Technical Data; Disposal - AEG MC 4461 BT Instrucciones De Servicio

English
50
Automatic Snooze Function
The automatically set alarm function can be switched off with
the SNOOZE button (16) for about 9 minutes.
NOTE:
The activated function is shown in the display through the
"SNOOZE" notification.
Deactivating the Alarm Function (in Standby Mode)
In order to deactivate the alarm function, press the V+/AL 1,
or V−/AL 2 button (4). The symbol " ", or " " will go out.
Cleaning
CAUTION:
Do not immerse the device in water.
• Always remove the mains plug before cleaning the
device.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Problem Cause
CD can not be CD is not insert-
played back. ed or inserted
incorrectly.
CD jumps Check the disc
during play- for fingerprints,
back. dirt or scratches.
The device The device is
cannot be blocked, i.e.
operated. "stuck".
No audio Device has not
signal during been registered
Bluetooth with the audio
connection source.
Volume too low
MC4461BT_IM_new2 ab PO7108
Problem
Bluetooth
connection
cannot be
established

Technical Data

Model: ........................................................................... MC 4461 BT
Power supply: .......................................................220 - 240 V~ 50 Hz
Power consumption:................................................................. 14 W
Protection class: ................................................................................
Net weight: .............................................................. approx. 2,21 kg
Radio section
Frequency ranges:........................................FM 87.5 ~ 108.0 MHz
Bluetooth
Solution
Bluetooth support: ........................................................V2.1 + EDR
Ensure that the disc is
Transmitter power: ................................................................2.5 mW
inserted with the label
Range: ..................................................................approx. 15 meters
facing upwards.
Transmission frequency: .................................... 2,402 − 2,480 GHz
Check the disc for
Protocols: ...................................................................A2DP / AVRCP
fingerprints, dirt or
The right to make technical and design modifications in
scratches.
the course of continuous product development remains
Remove the mains
reserved.
plug for approximate-
This device has been tested according to all relevant current
ly 5 seconds. Then
CE guidelines, such as electromagnetic compatibility and low
turn the device on
voltage directives, and has been constructed in accordance
again.
with the latest safety regulations.
Check whether there
is a connection.

Disposal

Re-register the device
with the audio source,
Meaning of the "Dustbin" Symbol
if necessary.
Increase the volume
on the device.
Increase the volume
on the audio source.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of re-utili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
Cause Solution
Registration Check, whether the
doesn't work audio source supports
the A2DP protocol.
Audio source is Turn the audio source
turned off on
Bluetooth is Turn on the Bluetooth
turned off on the function on the audio
audio source. source.
Bluetooth version Use a different play-
is not supported. back device.
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
29.12.16