Using Sound Effects; Using Other Equipment - Panasonic SC-PM46 Instrucciones De Funcionamiento

Using sound effects

Selecting sound effects Selecting sound effects
You can change the sound effect by selecting Preset EQ or adjusting
the bass or treble effect.
Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting.
HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
EQ-OFF No effect
Bass or treble
Enable you to enjoy the lower or higher pitch sound.
1 Press [BASS/TREBLE] repeatedly to select your desired
setting.
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
2 Press [ /REW/4] or [ /FF/¢] to adjust the level.
Note
The tone level can be varied within -4 to +4.
Enjoying surround sound Enjoying surround sound
Enable you to add natural width and depth to the stereo sound.
To activate
Press [SURROUND] to display "
To cancel
Press [SURROUND] again to clear "
Note
• Surround sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the
surround sound effect.
12
12
BASS TREBLE
original display
" indicator.
" indicator.

Using other equipment

Connecting and playing a USB Connecting and playing a USB
USB
mass storage class device mass storage class device
MP3
The USB connectivity enables you to connect and play MP3 tracks
from USB mass storage class. Typically, USB memory devices. (Bulk
only transfer)
Preparation
Before connecting any USB mass storage device to the unit, ensure
that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The USB
device is not recognised by this unit.
Reduce the volume and connect the USB mass storage
1
device.
Press [USB 6] to start play.
2
To Action
Press [USB 6].
pause play
Press again to resume play.
Press [CLEAR 7].
stop play
"RESUME" is displayed. The position is memorized.
Press [USB 6] to resume.
Press [CLEAR 7] again to clear the position.
skip track Press [ /REW/4] or [ /FF/¢].
skip album Press [ALBUM
Press [ALBUM
numeric buttons in the stop mode.
Display function
Press [DISPLAY] repeatedly during play or pause mode.
Elapsed time Remaining time
ID3 (Artist) ID3 (Track)
For other operating functions, they are similar as those described in
"Discs" (➡ page 8).
USB enabled device
(not included)
It is not recommended to
use a USB extension cable.
The device connected
via the cable will not be
recognised by this unit.
or ] in the play mode.
or ] once and then the
Album name Track name
ID3 (Album)