Operation; Preparing The Appliance - Silvercrest SRGS 1300 A2 Instrucciones De Servicio

RP90958 Raclette mit heißem Stein LB5 Seite 44 Mittwoch, 12. Juni 2013 9:17 09
2. Check that the appliance shows no signs
of damage.
3. Remove any labels or stickers (but not
the type plate on the underside).
4. Clean the appliance before using it for
the first time. Observe the information in
the section entitled "7. Cleaning" on
page 46.
5. Select a location that is firm, level and
not flammable. Maintain a distance of
approx. 50 cm from other objects.
6. Turn the temperature regulator 5 to "0".
This switches the appliance off.
7. Plug the mains plug into a suitable mains
socket that corresponds to the technical
data.

6.1 Preparing the appliance

1. Select a location that is firm, level and
not flammable. Maintain a distance of
approx. 50 cm from other objects.
2. Turn the temperature regulator 5 to "0".
This switches the appliance off.
3. Grease the raclette pans lightly 7 on the
inside.
Note: Use kitchen paper dipped in a
little cooking oil.
4. Lightly grease the top surface of the
stone grill plate 1 and grill plate 2.
Note: Do not use too much oil as this
could catch fire and burn. Spread the oil
carefully using a cooking brush or
kitchen paper.
5. Place the stone grill plate 1 and grill
plate 2 on the appliance.
44
8. Turn the temperature regulator 5 to
MAX.
The indicator lamp 3 lights up and the
appliance heats up.
9. Leave the appliance switched on for
around 10 - 15 minutes.
10.Switch the appliance off by turning the
temperature regulator 5 to "0".
11. Take out the mains plug and allow the
appliance to cool down.
12. Clean the appliance again. Observe the
information in the section entitled
"7. Cleaning" on page 46.

6. Operation

Note: The grooves on the stone grill
plate 1 must face up. The grill plate 2
can be used on both sides.
6. Plug the mains plug into a suitable mains
socket that corresponds to the technical
data.
7. Turn the temperature regulator 5
clockwise to MAX.
The indicator lamp 3 lights up and the
appliance heats up.
8. Allow the appliance heat up for around
10 minutes.
Note: The stone grill plate 1 takes
about 30 minutes to get hot.
The appliance is now ready to use.